This Yellow Line extension would have served Hayden Island and Vancouver, and initial planning for it took place in conjunction with the Columbia River Crossing project. Tracks in Vancouver would have been laid out as a northbound and southbound couplet on Broadway and Washington, respectively.
I shudder when I see the price of simple ham accessories and antennas made and sold commercially, especially when making your own is both instructive and fun.
Even better, I can often build better quality, longer lasting items than I can buy, for the simple stuff anyway. Design your circuit and board using your choice of circuit design apps. Laser -print a full-size mirror-image of the board onto shiny coated paper it must be a laser, not an ink jet or dot-matrix.
The backing sheets for laser-printer-friendly sticky labels work well, apparently, while glossy advertisements such as the real estate newsletters are OK too.
Plain office paper is no good because the toner bonds to the paper. Some experimentation may be required here, depending on your printer, to get the setup just right.
Plain paper is fine for that! Prepare the PCB blank. Cut it to size. Hold the board only by the edges from now until it is etched.
Borrow a clothes iron. Set it to its maximum heat and let it get hot. Place the PCB face-up on an ironing board or similar surface.
Place the printed design toner -side down on the board, making sure the printed design aligns with the board Erroll trims the paper to size to make that easier. Place a sheet of kitchen-roll absorbent paper towel on top of that to avoid the iron snagging or sticking to the coated paper.
Iron the design onto the board with the hot iron.
Press gently for about 2 minutes. Etch the board using a solution of ammonium persulphate to dissolve the exposed copper, leaving behind the copper protected by the toner.
Erroll says it works better than old-school ferric chloride and can be re-used, adding an extra spoon of chemical if the etching slows down.
Use a disposable plastic container such as one of those microwavable tubs liberated from your Chinese take-away, not the best crockery. Wash and clean the etched board, removing the toner with a scourer I guess.
Drill the component holes carefully using a fine drill, preferably in a bench drill or drill stand. Place and solder the components. Refine your design and repeat the process until done. Send the completed design as a Gerber file to a PCB manufacturer if you feel the need to achieve a more professional finish, especially if you are preparing more than just a handful of boards.
Erroll says he has made boards this way for surface mount as well as through-hole components, so the toner-transfer method works even for those fine traces.Compare the most helpful customer reviews of the best rated products in our Photographic Light Meters store.
These products are shortlisted based on the overall star rating and the number of customer reviews received by each product in the store, and are refreshed regularly. This is a quick reference guide to show you how to reset your Samsung DLP TV’s lamp hour meter or hour counter.
Step 1: Buy authentic. It’s important that you install an OEM lamp and avoid a generic, compatible lamp.. Knock-off, compatible generic lamps may seem like a bargain in the beginning. You should use this mode for most of your photography, since it will generally do a pretty good job in determining the correct exposure.
I leave my camera metering mode on matrix metering for most of my photography needs, including landscape and portrait photography. The Fluke 87V is a great choice, although it’s not necessarily a cheap multimeter, when compared to most models of meter.
Fluke makes some of the best multimeters on the market, and they’re all designed for heavy use in the field. 14 items · Light Meters from Adorama - Same Day Shipping 'til 8PM! The best combination of quality services, vast selection, knowledgeable staff and competitive benjaminpohle.com Light MetersAdorama - More Than A Camera Store Spectra Cine A Professional IV-A Light Meter System, Black SKU: SPCAB MFR: AB.
List Price 1 option . A light meter is a device used to measure the the general field of architectural lighting design to verify proper installation and performance of a building lighting system, and in assessing the light levels for growing plants.
When using a film whose spectral sensitivity is not a good match to that of the light meter.